Welcome: A.YITE TECH - ZHOU ENSI LTD
Language: Chinese ∷  English

Water Analysis

  • GE-139 Turbidity Analysis
GE-139 Turbidity Analysis

GE-139 Turbidity Analysis

  • CE certificate
  • Customized Service
  • Product description: GE-139 Turbidity Analysis, Nephelometer Online Industry Meter, industry grade online analytical instruments, it offer a suitable solution for the monitoring
  • ISO9001 ISO14001 ISO45001 CE ATEX
GE-139 Turbidity Monitor Meter is one industry grade online analytical instruments, it offer a suitable solution for the monitoring of final effluent water discharge to ensure compliance with Environmental Agency regulations. The Turbidity Measurement Meter is suitable for the monitor of turbidity concentration in Water Treatment Plant, Reservoir, Sewage Treatment Plant, water quality testing and management, river monitoring, stream measurement, reservoir water quality testing, groundwater testing, water and wastewater treatment, and effluent and industrial control. 


According the Light scattering theory, the scattering of light was thought of as the redirection of light that takes place when an electromagnetic wave (i.e. an incident light ray) encounters an obstacle or non-homogeneity, the turbidity concentration is directly proportional to the scattering of light, when the light go through the liquid, as this theory. The turbidity sensor directs a focused beam into the monitored water, The light beam reflects off particles in the water, and the resultant light intensity is measured by the turbidity sensor's photodetector. The light intensity detected by the turbidity sensor is directly proportional to the turbidity of the water. 


Character:
* Clear the air bubble automatically, higher accuracy and stabilityTurbidity Monitor Meter 
* Easy install, stability, 
* Easy maintenance, calibrate each 3 month
* Better Repeatability, no affect from flow and pressure 
* 4~20mA isolating current output, high/low limit alarm
* Automatic diagnosis, easy calibration
* Measure units: NTU, FTU, TE/F, mg/L


Model Number

GE-139B

Measurement range

040020005000NTU

Measuring method

Infrared light 90 or 180°

Temperature range

6050.0

Accuracy

0.001NTU

Precision

±1% F.S

Temp compensation

Auto or manual

Stability

Drifting every week0.5%F.S

Isolated current

Two output  4-20mA

Communication

RS485 MODBUS RTU

Other Function

Data record/graphic display/data upload

Alarm relay

Three 3A 240VAC/3A 28VDC or 120VAC

Power supply

85265VAC936VDC power3W

Dimensions

144*144*118mm

Installation

Dimension of the recess:138x138mm or Wall-hung

Protection grade

IP65


Optional Function: Auto Clean

Connect the auto clean port with a air pump, the sensor will auto clean by air blow,  the controller will control the clean time and times.
automatically cleaning turbidity sensor by air blow

CONTACT US

Contact: Mr. Chou

Phone: 13166369204 (wechat)

Tel: 400-852-8332

Email: shanghai@ayite.net

Add: 17 &22, No.2928, Chuan Zhou Highway, Shanghai, 201319, China